In the kitchen decoration, the installation of the cooker is a very important part because it is related to our safety. So how to install a kitchen stove to protect our safety and make our cooking faster? The following small series introduces you.
Cooker installation location
1. The distance between the back of the cooker and the wall is not less than 15 cm, and the clearance between the side and the wall is not less than 20 cm.
2. If the wall surface is a flammable material, an insulation fireproof layer shall be attached.
3. The fireproof layer should be no more than 10 cm at both ends of the cooktop and the lower part of the cooker. The upper part of the cooker should be no less than 80 cm.
4. The minimum distance between the cooker and the cylinder is 1 meter.
5. The intake hose should not exceed 2 meters in length.
Cooker installation environment
1. The cooker should be installed in a well-ventilated kitchen.
2. Do not stack flammable materials under and around the cooker, which may cause fire hazards.
3. The kitchen area should not be less than 2 square meters, and the indoor height should not be less than 2.2 meters.
4. The window should be open normally. When the gas burns, some exhaust gas will be generated. Opening the window can prevent poisoning.
5. The kitchen should be well separated from the adjacent rooms to prevent the leaking gas from colluding with each other.
Not suitable for eating directly in the kitchen
In the winter, many people choose to stay in the kitchen with their family. The kitchen has become a gathering place for food. However, the gas stoves, natural gas stoves and electromagnetic cookers used in the kitchen produce air pollutants such as carbon monoxide and sulfur dioxide. These contaminants cannot be removed immediately after a ceasefire, so it is not advisable to eat in the kitchen immediately after cooking.
The tungsten carbide rings are made up of the hardest metal on the earth. They are tougher than the titanium rings and are more durable than the gold rings. This kind of ring is often used as sealing, disc wheel, instrument and so on.
The Tungsten Carbide Roll and ring has good turning and no special lathe. The existing ordinary lathe can be used for rolling the roll ring. When turning, the cutter head can be made of hard alloy tool with high hardness.
Tungsten Carbide Rolls And Rings
Professional manufacturer of Tungsten Carbide Roll and ring in China, Wholesale Tungsten Carbide roll, Tungsten Carbide ring, Diamond roll and ring with low price, high quality.
Marie Jay's Metal Products Co., Ltd , http://www.mariejmetals.com