1. The use of rattan or bamboo furniture products will change color and have scale. It can be scrubbed with salt water, which can decontaminate and make it soft and tough. Usually wipe with a wet towel to keep it clean.
2, usually should regularly wax leather and wooden furniture. You can use other products such as Bi Lizhu.
3. Cracks appear in wooden furniture or flooring. You can cut the old newspaper, add a proper amount of alum, boil it into a paste with water or rice soup, embed it in a crack with a knife, and smooth it. After drying, it will be very firm. Then paint with the same color, the wood can be Restore to the original face.
4. Make tea on the coffee table with the fireproof board. After a long time, there will be tea stains. Sprinkle some water on the table, wipe it with the foil paper in the cigarette case, and then scrub with water to wash off the tea stains easily.
5, after wiping off the trademark will leave a residue of self-adhesive, sticky and dirty. You can use a thick eraser and it works well. The chewing gum on the floor can also be removed with an eraser.
6, hot cups and other directly placed on the lacquered furniture, will leave hot marks. Wipe with tartar with kerosene, alcohol, toilet water or strong tea, or gently rub or apply a layer of petroleum jelly on the hot marks with iodine, and wipe off the hot marks with a rag every two days.
7. If the electroplating switch of the appliance is touched frequently, it will lose its luster and be eroded by sweat. It can often be coated with Vaseline to prevent salt erosion.
8. Burning marks on the furniture paint surface due to burns. If only the paint surface is burning, apply a thin layer of hard cloth on the toothpick to gently wipe the traces. Then apply a layer of wax and the scorch marks can be removed.
9, white desktop, chair is easy to dirty. It is very difficult to remove with a rag. The toothpaste can be squeezed onto a clean rag and wiped gently, and the stain will be removed immediately. Remember not to use too much force to avoid damaging the paint.
10, the furniture paint surface is worn. If you do not touch the wood, you can apply it to the damaged area with a crayon or pigment that matches the color of the furniture, cover the exposed base color, and then apply a thin layer of transparent nail polish.
The article is edited by http://sz.gojiaju.com/Suzhou Home Network.
Tungsten Bar, also known as Tungsten Rod. It has high-purity, high-density and excellent high-temperature, proving no deformation.
We can produce the tungten round bar, flat bar and other as your drawings.
The Tungsten bar can use for the application of emission cathode, high-temperature forming rod, support wire, lead-in wire, printer pin, various delectrodes and heating devices of quartz furnace, etc.
Tungsten Bar
Tungsten Bar,Tungsten Rod,Tungsten Flar Bar,Polished Pure Tungsten Bar
Baoji Shengyuan Metal Material Co., Ltd. , https://www.baojisymetal.com