Due to the variety of sanitary products, consumers often pick up their eyes when they buy them. After buying them home, they find that they are not in harmony with their own bathroom. For example, in the market, I chose a very beautiful wash basin, but when I got home, I found that my head was bigger and occupied some space of the toilet, so that the tissue box and the trash can could not be "everyone". The result is that each time "It is not very convenient."
Consumers should consider what kind of products to purchase at the design stage. During construction, they can reserve space according to the specific installation requirements and technical parameters of the purchased products, rebuild pipelines, and create installation conditions to ensure smooth renovation. Finished, bathroom products can be installed and used normally. In addition, the installation of sanitary ware requires very accurate measurement data, which is a difference of 1 cm may require a second rework, so be sure to ask the professional to measure the size, sloppy.
Before the start of construction, it is not well-considered, while doing the side-by-side reform, there is no way to renovate the water circuit, leaving hidden dangers for subsequent construction.
Under normal circumstances, the decoration company will draw the decoration design drawings for the owners, including the overall renderings, detailed construction drawings and water circuit reconstruction drawings. However, due to the incomplete communication between some owners and the designers in advance, due to the inconsistency of the construction, the original design is constantly revised, so that when the construction is modified, the concealed works such as water circuit reconstruction are completed, but no map is found. Follow, leaving hidden dangers for subsequent construction.
In particular, when there is a water circuit in the bathroom that needs to be remodeled, the consumer must ask the designer for a circuit transformation map in advance. If there is any change in the construction process, the consumer must communicate with the designer and draw a transformation map. Start construction, it is best not to modify it while construction, so as not to injure the wire during the construction of the wall in the future.
The design is not flexible, and a slight error in the construction will cause a series of rework
This situation is more common in toilets. If the socket on the wall is fixed, the height of the ceiling is found to be in conflict with it, but the tile has been attached and it is difficult to change. Another example is that after the wash basin is installed in place, it is found that the pipeline cannot pass normally, and it has to be turned out of the bathroom cabinet by a few more turns. Before purchasing sanitary products, it is necessary to consider whether the existing design and future construction are feasible and flexible. If the bathroom cabinet requires sufficient installation space, the faucet needs to be pre-buried with suitable water supply pipelines, the toilet seat needs to consider the wall distance, the shower room needs to consider the load-bearing wall, the floor drain position should be suitable, etc. These conditions must be considered before the home installation construction. Good, otherwise the bathroom products can not be installed and used.
Model XLT-UTP-602 Waterproof Twisted Pair Transmitter is a transmission equipment that does not require additional Power Supply. The internal coils are three sets of wound high-density magnetic cores and compression-sealed to make the transmission effect more stable and the transmission distance. Farther, to prevent equipment damage caused by moisture. It uses a pair of twisted pair cables to transmit a single baseband video signal transmission device compatible with PAL, NTSC, SECAM baseband video compliance signals. Mainly used in security, teaching and other fields of high-definition AV signal passive twisted pair video transmission equipment.
In practical applications, we use two XLT-UTP-602 (matched into a pair) to use, which can transmit one video transmission distance of 0-500 meters, and the transmission distance of the twisted pair can reach 600 meters. The XLT-UTP-602 can also be paired with active receivers such as the XLT-UTP-301R, XLT-UTP-308R, and XLT-UTP-3016R with transmission distances of 600-800 meters. XLT-UTP-602 has strong interference suppression and anti-electromagnetic radiation capability, can be used in various complicated interference environments, and does not generate electromagnetic interference to the outside world. It is quite environmentally friendly and economical. At the same time, there are 4 pairs of lines in the five or more types of unshielded twisted pair. Each pair of lines can transmit one signal, which can transmit telephone, RS485 control data, audio, multi-channel video and even low-voltage power supply. Compared with the traditional video and audio transmission scheme, the passive twisted pair video transmitter can greatly reduce the cost and improve the performance. Compared with other similar products, the new Wright products have better performance, better stability and better cost performance. It is obvious.
UTP
UTP BNC, BNC UTP, UTP BNC Video, UTP BNC Video Balun
Shenzhen Wardmay Technology Co., Limited , https://www.wardmaycctv.com