The characteristics of the integration of electronic fence and video surveillance

Power grid safety work has always been the focus of China's safety work. To protect the safety of power grids, the State Grid Corporation of China has taken various measures to ensure safe operation of the power grid. The application of the Lakemax perimeter alarm system integrated with electronic fences and video surveillance is of great significance for securing the safe operation of the power grid.

The characteristics of electronic fence integration with video surveillance:

(1) The electronic fence perimeter alarm system has strong blocking and certain deterrent functions and alarm functions. However, if the electronic fence is too large, the guards need to go to the scene to inspect the police when they call the police. There is no accuracy in the inspection target. Afterwards, there is no evidence to find out if there is no image to assist the police in solving the case. A lot of human resources are wasted. After using video linkage, the police are intuitive and the alarm address is accurate. The target of handling police warnings is clear and the accuracy of the inspection sites is greatly improved. After the incident, it can provide evidence for reference according to the alarm video to assist the police in solving the case.

(2) Video surveillance system 24×365 days real-time and electronic fence system form an intelligent linkage anti-theft alarm system, so that the substation power equipment protection measures to further improve.

(3) Video surveillance and electronic fence linkage alarm When the intruder touches or destroys the electronic fence, the electronic fence controller will promptly issue an alarm and activate the camera's LED white light source to illuminate the alarm scene. The system will record the alarm area.

(4) The sensitivity of the alarm can be flexibly set to adapt to rain, snow and ice-ice weather, ensuring a very low false alarm rate.

(5) The system divides the area management and accurately locates the alarm area according to the video camera.

(6) Multiple alarm interfaces (front-end on-site and information management centers provide interfaces for alarm linkage, and three sets of alarm signals: one set of fence alarm, one set of host fault alarm, and one set of ground alarm).

(7) The monitoring host can realize automation through the communication interface. For example, when an artificially forced entry into the electronic fence occurs, the system will automatically alarm and automatically record and monitor the alarm area. Afterwards, providing the police with an image will also solve the case.

(8) Linkage triggers searchlight deterrence and provides nighttime camera light source compensation. When an illegally invaded electronic fence touches the network, an alarm is triggered. The alarm linkage device triggers the substation searchlight power switch or the alarm linkage camera LED white light source to automatically light up; Searchlight or linkage camera LED light illumination has a strong deterrent and deterrent effect on intruders. At the same time, it provides good night-time illumination compensation for HD video recording, making forensic images clear and stable.

(9) Flexibility - The entire system can be flexibly deployed. In the armed state, once someone illegally climbs the fence, the system will immediately alarm and effectively prevent intruders from intruding. At the same time as the alarm, the monitoring system displays information such as the alarm zone, time, alarm type, etc. At the same time, the camera starts to capture the illegal intruder trail, and the alarm information and the illegal intruder trail are stored and recorded.