The single diamond drill is specially designed for the ordinary inner and outer cylindrical grinding machine to trim the outer wheel of the grinding wheel. It is fixed on the Z-axis tailstock by a fixture to make a reciprocating worktable, and the grinding wheel is trimmed by the intermittent feeding of the X direction. This form is the most primitive and common method.
However, in this form, it is difficult to perform arc trimming on the two side corners of the grinding wheel when grinding the crankshaft, and the arc formation can only be completed by manual operation, and it is difficult to achieve the precision required by the process. At the same time, the straightness and precision of the dressing wheel are directly dependent on the geometrical accuracy and motion accuracy of the table. These two precisions will ultimately be directly reflected on the grinding surface and R-arc of the workpiece.
For more information, please see the related links of metal processing online: application of grinding wheel dresser on grinding machine
Stainless Steel Wire,Brass Wire,Hanger Wire Form
Compression Springs ,Stampings,Extension Springs Co., Ltd. , http://www.ns-springs.com