According to the style: It is divided into the non-skirt cylinder and the skirt cylinder. The styles are heart-shaped, round, oval, rectangular, triangular, etc.
According to the function: it is divided into ordinary bathtubs, jacuzzis, etc. The jacuzzis include sitzbathing jacuzzis, hydromassage bathtubs, hydro-massage bathtubs, pulse massage bathtubs, etc.;
According to production materials: divided into cast iron bathtubs, acrylic bathtubs, steel bathtubs, wooden tubs, etc.;
Acrylic bathtub - The market share is large, the surface of acrylic material is polymethyl propionate, and the back is made of resin plaster plus glass fiber.
Advantages: easy molding; good insulation properties; good gloss; light weight, easy installation; Due to the above characteristics, acrylic bathtubs are cheaper to make.
Disadvantages: Relative to ceramics, enamel surface, the disadvantage of acrylic material is easy to hang dirty, noise when water injection, poor heat resistance, not wear, the surface aging and discoloration, but the imported acrylic cylinder is only relatively good quality.
Cast iron bathtub - made of cast iron and covered with enamel.
Advantages: long service life, high grade, easy to clean, due to the cylinder wall thickness, thermal insulation performance is also very good. Moreover, the cast iron cylinder has a good gloss and the service life is the longest among the three cylinders. Cast iron baths are more resistant to acids, alkalis and abrasions than similar products.
Disadvantages: The weight is very considerable, so it is difficult to handle and install. Because of many factors, the prices of cast-iron bath tubs and bath tubs are both much more expensive and the most expensive.
The steel plate bathtub - the steel plate cylinder is made by stamping the bathtub special steel plate with the whole thickness of about 2 mm, and the surface is then made by the enamel treatment.
Advantages: It has the characteristics of wear resistance, heat resistance, pressure resistance, weight between the cast iron cylinder and the acrylic cylinder, the insulation effect is lower than the cast iron cylinder, but the long service life, the overall cost-effective. Difficult to hang dirty, good cleaning, not easy to fade, lasting gloss, but easy to shape, cheaper.
Disadvantages: Because the steel plate is thin, the firmness is not enough, the noise is large, the surface is easy to remove porcelain, and the heat insulation performance is not good, so some have added the insulation layer.
Wooden bath barrels - material Nanmu, cedar, oak, fir, pine and so on. Nanmu bath barrels have the best overall performance but are rarely seen in the market. Pine and fir barrels are susceptible to moisture, blackening and mildew, and their overall performance is poor.
Advantages: It has the advantages of heat preservation, environmental protection, small footprint, easy cleaning, long life, and easy installation.
Disadvantages: In the case of long-term drying, it is easy to crack, so if it is not used for a long time, put some water in the barrel.
Jacuzzi - You can use the circulating water for hydromassage, but use electricity as an energy source.
Advantages: The pulse whirlpool bath has a signal generator that simulates the human body's spectrum. The signal it sends is very similar to the human body's spectrum. It produces a resonance phenomenon and plays the role of passing through the network. In addition to the massage function, some bathtubs also have computer boards that can be used to install telephones, CD players, and radios. Other bathtubs can be automatically controlled and controlled by computers.
Disadvantages: In addition to higher prices, the Jacuzzi not only requires a larger bathroom area, but also has high requirements for water pressure, power and installation.
Bathtub glass overall bathroom
Hex Socket Bolts,Button Head Allen Bolt,Allen Cap Screw,Hex Socket Head Bolt
Nantong Romax Hardware Co.,Ltd. , https://www.hardwarehouse.cn