Floor paint care and precautions:
1. Do not abuse the machine. Try to avoid excessively heavy tapping on the ground. Do not hit the ground with very heavy or hard objects. Unless necessary for work, avoid frequent unnecessary wear. Especially for the ESL floor, in order to maintain its smooth and meticulous appearance and beautiful appearance, pay special attention to avoid traffic such as steel wheels; do not have excessive traffic and load, and pay attention to avoid scratches when contacting the ground.
2. Surface cleaning, epoxy floor surface cleaning method is simple, generally scrubbed with water. If it is difficult to clean the stain, use the cleaning agent, or use industrial degreaser, detergent, etc., and then rinse with water. For relatively stubborn stains, mechanical cleaning can also be used, but do not apply pressure or excessive wear on the ground to affect the smoothness and luster of the ground.
3. Avoid chemical pollution
4. Anyone who enters the workshop must change shoes (so as the ground mud is brought into the workshop and the ground is scratched);
5. Any hardware: such as iron chairs, iron tables, iron shelves, etc., must be wrapped with soft plastic or rubber to avoid scratching the ground during use;
6. When cleaning the floor, please use soft mop or wet and dry vacuum cleaner. It can be cleaned with water or detergent, but please pay attention to the ground slippery;
7. Please use hard or elastic rubber wheel for the cart and the wheel of the board, and use it separately inside and outside the factory;
8. If it is worn or scratched due to long use time, local repair can be carried out in a small area. If the area is large, it is recommended to re-roll it once.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
JiangXi SenHai Natural Plant Oil Co.,Ltd , https://www.senhaioil.com