All waterproof clothing and protective equipment manufactured using rubber-coated fabrics must meet the following standards:
1. The fabric quality, appearance, and physical-chemical properties of the waterproof suit must be of high standard.
2. The design of the waterproof suit should be tailored according to the specific needs of different work environments. The structure should allow for free movement of limbs during operation, while minimizing the risk of snagging, tearing, twisting, or abrasion. It should also be easy to put on and take off.
3. The rubber boots that come with the waterproof suit should be half-waist rain boots, and the gloves should be waterproof protective gloves.
4. Appearance requirements for waterproof clothing:
- The surface of the labor protection products should be smooth, clean, and free from any visible imperfections.
- There should be no damage, dead creases, bubbles, knife marks, delamination, jetting, sticking, or lack of glue.
- The stitching should be straight, uniform, neat, and elastic. The distance between broken threads should be at least 1.5 cm, and the stitch density should be 1 cm.
- The symmetry difference should not exceed 0.5 cm, and the length difference of the pants should not be more than 0.6 cm.
- The trademark position should be accurate, the text clear, and there should be no burrs or rough edges.
- The joint width should be at least 1 cm, and the adhesive width of the tape should be no less than 2 cm.
- The color difference between matching pieces should not be less than 3 levels.
This information is provided for reference and compliance purposes in the manufacturing and selection of safety gear. Always ensure that the products meet local safety regulations and are suitable for the intended working conditions.
For more details, visit: http://
Concertina Barbed Wire, also known as Razor Wire, is a type of barbed wire that is formed in large coils which can be expanded like a concertina. It is designed with sharp edges or points arranged at intervals along the strand(s). This type of wire is used to form barriers or fences for security purposes, often used in military or prison settings.
The concertina design allows the wire to be compacted during storage and transport, and then expanded and installed with ease. It is highly effective as a deterrent and physical barrier due to its sharp blades which can cause serious injury to those trying to cross it. It is often used in combination with other types of fencing to create a high level of security.
Concertina wire is a type of barbed wire or razor wire that is formed in large coils which can be expanded like a concertina. It is used to form military-style wire obstacles.
1. Concertina Barbed Wire: This is a type of barbed wire that is coiled and can be expanded like a concertina. It is designed to create an obstacle that is difficult to overcome. It is often used in military settings or for high-security areas.
2. Concertina Razor Wire: This is similar to barbed wire but has razor-sharp blades instead of barbs. It is designed to cause serious harm to anyone trying to climb over or through it.
3. Concertina Wire Fencing: This is a type of fencing that uses concertina wire. It is often used for security purposes, particularly in prisons, military bases, and other high-risk areas.
4. Concertina Wire: This is a general term that can refer to either concertina barbed wire or concertina razor wire. It is named for its ability to be expanded and contracted like a concertina, which makes it easy to transport and install.
Concertina Barbed Wire,Concertina Razor Wire,Concertina Wire Fencing,Concertina Wire
Hebei Aibuer trading co., Ltd , https://www.ablehardwares.com