How can the market prospects be used in the process of hardening the ground and what effect can it have?
First place the mesh neatly on the ground, cross between two adjacent meshes by 10 cm, and use wire or welding machine to link the two adjacent meshes together (the stronger the better). If the time is too long, it will loosen. The next step is to lay cement on the top of the mesh. The thickness of the cement is according to its own requirements. Of course, the thicker the better, the basic process is this. After waiting for the cement to dry, it can be used.
It can act as a reinforcing bar, effectively reducing ground cracks and dents widely used in roads, as well as factory floor hardening.
The method of use is used in municipal construction: Overpass interchange deck pavement, square concrete air, concrete pipe, fence, slope protection, etc. Water and power coal: hydraulic equipment, power dam foundation, protective net, etc.; , slope reinforcement, collapse protection, breeding industry, animal husbandry and so on.
The use is also very common, construction mesh can be used as a method of fixing the external wall heat preservation galvanized steel wire mesh: the wire mesh is fixed by plastic shrink bolts. When fixing the wire mesh, the wire mesh should be nailed from the top layer to the corners. The steel wire mesh should be laid horizontally, or it can be laid vertically according to the size of the slits. When nailing the wire mesh, one end of the wire mesh (at a distance of 50 mm) is first disassembled into an L-angle so that the wire can be twisted. Use a steel wire with a diameter of not less than 1.5 mm to make a V-type clamp. First, secure the wire mesh, and then install the anchor by perforating or injecting the quincunx.
The floor slab is made of cast-in-place reinforced concrete slabs, and the steel sheets are laid on the floor steel beams as an eternal template. The middle and upper irons are welded steel mesh sheets. The construction of the mesh is a kind of low-carbon wire rod reinforcement, after cold rolling, after the correction, the vertical and horizontal reinforcing bars are identified by a wire mesh equipment to display at a certain interval, and the interspersed points are all constructed with the resistance welding together.
First place the mesh neatly on the ground, cross between two adjacent meshes by 10 cm, and use wire or welding machine to link the two adjacent meshes together (the stronger the better). If the time is too long, it will loosen. The next step is to lay cement on the top of the mesh. The thickness of the cement is according to its own requirements. Of course, the thicker the better, the basic process is this. After waiting for the cement to dry, it can be used.
It can act as a reinforcing bar, effectively reducing ground cracks and dents widely used in roads, as well as factory floor hardening.
The method of use is used in municipal construction: Overpass interchange deck pavement, square concrete air, concrete pipe, fence, slope protection, etc. Water and power coal: hydraulic equipment, power dam foundation, protective net, etc.; , slope reinforcement, collapse protection, breeding industry, animal husbandry and so on.
The use is also very common, construction mesh can be used as a method of fixing the external wall heat preservation galvanized steel wire mesh: the wire mesh is fixed by plastic shrink bolts. When fixing the wire mesh, the wire mesh should be nailed from the top layer to the corners. The steel wire mesh should be laid horizontally, or it can be laid vertically according to the size of the slits. When nailing the wire mesh, one end of the wire mesh (at a distance of 50 mm) is first disassembled into an L-angle so that the wire can be twisted. Use a steel wire with a diameter of not less than 1.5 mm to make a V-type clamp. First, secure the wire mesh, and then install the anchor by perforating or injecting the quincunx.
The floor slab is made of cast-in-place reinforced concrete slabs, and the steel sheets are laid on the floor steel beams as an eternal template. The middle and upper irons are welded steel mesh sheets. The construction of the mesh is a kind of low-carbon wire rod reinforcement, after cold rolling, after the correction, the vertical and horizontal reinforcing bars are identified by a wire mesh equipment to display at a certain interval, and the interspersed points are all constructed with the resistance welding together.
Zhuzhou Zhirong Advanced Material Co., Ltd , https://www.zrcarbide.com