How Bishop teaches you how to remove the floor

In modern homes, flooring is the first choice for everyone to decorate, and the floor wears the most in daily life. The floor of the second-hand house is generally required to be completely dismantled, and solid wood floors with excellent appearance and precious materials can also be preserved. Let's introduce the following: Bishop Huang teaches you how to remove the floor and the removal of the old floor.

How to remove the floor:

1: The demolition process of composite wood floors is relatively simple. After clearing the furniture in the room, use a flat-head screwdriver to split the skirting board, and then pry and remove the corner floor along the edge of the skirting board. This floor may be damaged, but Other floors can be completely dismantled. Composite wood flooring with a locking structure should be drawn along the long side of the floor. This will make it easier. After the demolition of the composite wood flooring has no reserve value, it is generally necessary to remove the floor and remove it from the floor until the bottom of the damp proof mat is opened. The bottom floor may be wet. At this time, it is necessary to open the window for ventilation. After the floor is completely dry, the new floor is laid. .

2: The demolition process of solid wood floors is more complicated. After the baseboard is removed, it starts from the edge of the corner. Use a hammer to pick up the wooden floor. Because the solid wood floor is installed on the wooden keel, there will be some flexibility when it is lifted. Difficult, but can not use the cutting machine, because the cutting machine is easy to damage the ground and the expansion bolts fixing the wooden keel spark. When the solid wood floor is removed, try to keep the integrity of the floor. At present, many large cities have specialized in the recovery of solid wood flooring companies. The old floor can be processed into new wooden boards or papers, which can also provide owners with certain benefits and reduce the decoration costs.

Old floor removal note:

1, floor surface thickness requirements

Floor retreading is to restore the old floor as new by sanding, scraping, painting, and waxing the floor surface. Compared with repurchasing the floor, the old floor is adapted to the indoor environment, with better stability and much lower renovation costs.

However, according to experts, not all floors can be refurbished. There is a layer of aluminum oxide wear-resistant layer on the surface of the laminate floor. The refurbishment of the floor will damage the wear-resistant layer and cause the aging of the floor to increase. Therefore, the laminate flooring cannot be refurbished. Only solid wood flooring, engineered wood flooring and bamboo flooring with a surface thickness of 4 mm can be refurbished. Because the surface of the floor after grinding several times, will be polished off 1-2 mm, if the floor surface is too thin, it will polish the middle layer, thus affecting the floor life.

2, pay attention to supervision of renovation quality

At present, there are very few specialized floor retreaders, and most of the businesses involved in this business are Procter & Gamble. In order to ensure the quality of floor renovation, it is recommended that consumers request professional supervision personnel to supervise the construction.

Floor renovation is divided into grinding, scraping, coloring, painting, waxing and polishing five steps. When sanding, the sander should use 40-, 80-, and 120-grit sandpaper in order (the larger the mesh, the smaller the sandpaper particles, the less noticeable the scratches are after grinding). Sand three times, then puttying the floor, and then The floor is painted or shaded. Because the texture of the solid wood surface is natural, it cannot change the color, but can only adjust the depth of the floor color.

Before retreading, all items in the house should be removed to ensure that the house is clean and dusty when painted. The floor generally requires brush primer and two coats of paint. If the surface of the polished floor is flawed, it is necessary to brush the primer several times depending on the situation. Once the paint is completely dry, it can be brushed again. Therefore, the renovation of the floor usually takes 4 days.

3, the effect of local renovation is not good

The overall refurbishment of the floor of a room is better. It can basically achieve the effect of a new floor, but the partial renovation will result in the difference between the floor and the floor. The longer the service life of the floor, the more obvious the difference between the old and the new.

Damaged, mildewed and deformed floors may not be refurbished. Floor mildew generally goes deep inside the floor. The surface of the polished floor is still subject to moldy spots; floor deformation and damage cannot be remedied by sanding. If only a small part of the floor is damaged, mildewed, and deformed, it can be replaced with a floor of the same color. If there is no floor with the same color, you can choose a floor with similar colors and color and distress it to minimize the chromatic aberration. If most of the floors have been damaged or have become mildewed or deformed, it is recommended to purchase them again.

Editor's summary: The Bishop of Yellow teaches you how to remove the floor and the removal of the old floor notes. After the introduction, I hope to help you. For more information, please pay attention to this site.

Floor wood floor

Drinking Water Treatment Activated Carbon

Drinking Water Treatment Activated Carbon, Heavy Drinking Water Treatment Activated Carbon,Drinking Water Treatment Granular Activated Carbon, Drinking Water Treatment Using Activated Carbon

Ningxia Jinyihui Environmental Protection Technology Co., Ltd. ,