Characteristics and depiction of INA thin-wall bearing products

Home>Bearing knowledge>Characteristics and layout of INA thin-wall bearing products
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Characteristics and depiction of INA thin-wall bearing products

Source: China Bearing Network Time: 2013-02-18
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
INA thin-walled bearings---Thin-walled ferrule bearings are highly accurate, very quiet and highly load-bearing. These ball bearings are described in three ways; and the poles are small and the cross-sections are mostly square. In these series; even larger The shaft diameter and bearing bore; the cross section is also constant. These bearings are therefore called equal sections (CS). It is this characteristic that differentiates the thin-walled ferrule bearings in the ISO series from conventional bearings.
Therefore, it is possible to select a larger cross section and use a bearing that can carry a stronger bearing without changing the shaft diameter. The thin-walled ferrule bearing can be described as a bearing that is extremely light and requires little space.
Deep groove ball bearings, four-point touch bearings, angular touch ball bearings, thin wall ferrule bearings can be deep groove ball bearings (C), four-point touch bearings (X), angular touch ball bearings (E). In a different series Zhongdu supplies the above various depictions. The series depends on the size of the cross section. The ball matches the series. Deep groove ball bearings can support bidirectional axial loads and radial loads. Four-point touch bearings can support bidirectional axial loads and Radial loads, so they operate in the same way as double row angular contact ball bearings.
The angular touch ball bearing can match the optimal number of balls and has a touch point of view of 30°. They support a higher radial load than deep groove ball bearings or four-point touch bearings; and can support axial loads originating from the same direction. Alignment is particularly desirable; angular touch ball bearings can also be supplied as mating bearings. Thus, the rigidity and load bearing of these combinations can be much higher than for single bearing products.
Recommend to friends comments close window

Bearing related knowledge
Reasonable selection of rolling bearing clearance method The timing smoothing protection of the bearing can be used for the life of the highest bearing.
SKF agricultural machinery bearing purchase


This article links to http://
Please indicate the bearing network http://

Previous:The accuracy of the bearing Next:The wear life and accuracy of the INA bearing

Chain Link Fence

Chain Link Fence,Barbed Wire,Chainlink Fence Wire,Chain Wire Fence

Hebei Haiao Wire Mesh Products Co., Ltd. , https://www.haiaowiremeshfencing.com