The syringe pump consists of screw, bracket, driver, stepping motor and other components, the syringe pump work, the nut is connected to the syringe plunger, the syringe filled with liquid medicine, it can achieve high precision, smooth and safe Liquid delivery. Syringe pump is an important helper in the medical field, syringe pump operation is how the performance of it? Next will explain the operation of the syringe pump in detail. Syringe pump operation flow 1, open the right side of the power switch, press the control panel "on / off" button to boot. 2, lift the syringe clip left turn, the right syringe. 3, press the push button on the "push" button so that the syringe into the device by hand push rod slot, put down the syringe clip to fix the syringe. 4, confirm that the device identifies the syringe specifications and use the same. 5, "ml / h" indicator lights set infusion flow rate. 6, hold down the "exhaust bubble" button to quickly exhaust the air inside the airway. 7, press the "injection / standby" button to start infusion. 8, need to pause infusion in the "injection / standby" button. 9, infusion is completed, hold down the "on / off" button for three seconds off, turn off the right power switch. The above nine steps are the working process of the syringe pump, I believe that the basic grasp of this information for users in the use of such products has a very positive role. With the progress of science and technology, the development of syringe pump is also more suitable, and now the syringe pump is more convenient and safe to use.
Production Introduction
Silicon Carbide Sand has different types, according to different meshes to devide the the Silicon Carbide sand and Silicon Carbide Fine Powder. Black Silicon Carbide containing SiC about 95%, its toughness is higher than Green Silicon Carbide, most of the material used for processing low tensile strength of materials, such as glass, ceramics, stone, refractory, cast iron and non-ferrous metals, etc.
Green silicon carbide containing SiC is about 97% above, good self sharpening, mostly for processing hard alloy, titanium alloy and optical glass, also used for honing the cylinder and fine grinding HSS Cutting Tools.
Silicon carbide is mainly used in the production of grinding wheel, sandpaper, abrasive belt, whetstone, grinding block, grinding head, grinding paste and photovoltaic products in monocrystalline silicon, polycrystalline silicon and piezoelectric crystal and other aspects of the industry, such as grinding, polishing and so on.
Silicon Carbide Sand
Silicon Carbide Sand,High Abrasive Silicon Carbide,High Purity Silicon Carbide,Silicon Carbide Wafer,Green Silicon Carbide,Silicon Carbide Grit
Ningxia XingKai Silicon Industry Co., Ltd. , https://www.xingkaisic.com
