Speaking of the socket installation , many users will come to Tucao decoration problems encountered in the installation of this part of the socket : the installation of the socket is less or the location of the installation is not appropriate, etc. You can think, can not think of all; while the outlet is biased In our daily life is essential, today with Xiaobian together to understand the installation of the plug under the attention of it.
Socket installation notes:
â— When the socket is installed for switch and socket wiring, only one wire can be connected to each pile head, and the wire head can not be put on the wiring pile head. If two wires are connected to the pile head (switch and socket heads are usually small, the original design only takes one wire), loosening will affect the normal use of the rear switch or socket. The wiring pile head is easy to generate heat and light. Those who burned switches and sockets, and those who ignite caused fire.
â— The installation position of the switch is generally 1.3m from the ground and 15-20cm from the edge of the door frame. It is not convenient to install the switch behind the door due to inconvenient opening. The switch in one unit should be on and off in the same direction.
â— When installing the socket, pay attention to the distance from the socket to the ground is 30cm; toilet, kitchen socket height is determined. Bathrooms should be installed with splash-proof sockets. Above the three sides of the bathtub and above the faucet, sockets should not be installed. Gas meters around 15CM can not be installed inside the socket. (Disposal of burning appliances and electrical equipment is dislocated, and the net distance between them must not be less than 50cm).
â— Socket Installation Regardless of the single-phase three-eye socket or the two-eye socket, the line connected to each eye must not be mistaken. The one-phase three-eye socket should be grounded at the top of the eye. The lower left eye is connected to the left with a neutral line and the right eye is connected with the phase line. The left side of the two eye sockets is connected to the zero line and the right eye is connected to the phase line. If the line is connected incorrectly, an electric shock may occur during use. 
â— Household appliances generally avoid using two eye sockets. Single-phase three-eye sockets are used in table fans, floor fans, washing machines, and refrigerators. The installation of Yuba and heaters must not use ordinary switches, and switches that match the current of the equipment should be used.
â— Due to the large current of household air conditioners, other electrical appliances in use will be affected during start-up. Therefore, an air-conditioning outlet shall be provided with a separate circuit from the customer power distribution box. The installation height of the socket should be avoided in the position where the air conditioner is introduced into the refrigeration pipe (ie, the position of the reserved hole in the wall), and the socket should be installed about 10 cm above the position of the reserved hole. 
Above is Socket installation Some of the considerations, I hope to help everyone, in fact, Xiaobian think it is still in the early stages of design Confirm the number of switch sockets, socket The main job of the installation is still Assembling a master is generally not a matter of installation. If you want to know more about socket installation or decoration, please pay attention to this website, or go to the website Consultation at the exhibition hall.
Switch socket switch socket installation
The Geogrid including Polyester Geogrid, Fiberglass Geogrid, Steel Plastic Composite Geogrid and Plastic Geogrid.
The geogrid is a major geosynthetic material. Compared to other geosynthetic materials, it has unique performance and efficacy. Commonly used for reinforcement of soil structure or reinforcement of composite materials.
The uses of geogrid: It is suitable for embankment and embankment reinforcement slope protection tunnel wall reinforcement large airport parking lot wharf cargo yard and other permanent bearing foundation reinforcement.
The feature of geogrid:
The high strength creep can adapt to all kinds of environment soil, and can satisfy the use of high grade highway retaining wall.
It can effectively improve the locking and occlusion of the reinforced bearing surface, greatly enhance the bearing capacity of the foundation, effectively restrain the lateral displacement of the soil, and enhance the stability of the foundation.
More suitable for deep-sea operations, embankment reinforcement, fundamentally solve the other materials do stone cage due to long-term erosion by the sea caused by low strength, poor corrosion resistance, short service life and other technical problems.
It can effectively avoid the construction damage caused by the crushing and destruction of machinery and tools in the construction process.
Geogrid
Steel Plastic Geogrid,Polypropylene Geogrid,Stretch Plastic Geogrid,Biaxial Plastic Geogrid
ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scfiltermesh.com