Yunshui Tanxin tells you how to buy solid wood furniture

Yunshui Tanxin knows that solid wood furniture can be roughly divided into two categories, one is pure solid wood furniture, that is, all the materials of furniture are solid wood; the other is imitation solid wood furniture, mainly made of solid wood and wood-based panels. Of course, real solid wood furniture refers to the first type, that is, the material is not reworked, and no furniture made of wood-based panels is used.

According to different tree species, solid wood material can be divided into ash, eucalyptus, oak, birch, fir, yellow pineapple, eucalyptus, maple, mahogany and so on. Tree species of different materials have different properties. Take ash as an example, its tree is slightly hard, the texture is straight, the structure is thick, the pattern is beautiful, and the corrosion resistance and water resistance are better. It is easy to process but not easy to dry, and has good decorative properties. It is currently used in furniture and interior decoration. In the case of oak, for example, the oak has a distinctive mountain-shaped wood grain and a good touch texture. The texture is solid, the finished product has a firm structure and long service life. The disadvantage is that there are fewer high-quality tree species, which leads to the widespread use of rubber wood instead of oak on the market. In addition, if the work is not fine, it may cause deformation or shrinkage cracking.
So, how to judge the quality of solid wood furniture? In fact, solid wood furniture is just one aspect of wood. The value of solid wood furniture depends not only on the wood it uses, but also on the following aspects: First, the processing equipment and process capability of the manufacturer. Generally, large manufacturers have relatively good treatment of wood, and the quality of small workshops will be relatively poor. Even if the wood used by the small factory is real material, it is prone to problems in the future due to problems in equipment technology. The second is work. Can not just look at the appearance of beautiful and not beautiful, the internal feel, work leveling and neatness also reflects the quality of furniture. Third, the auxiliary materials: the quality of the adhesive (glue) and paint is also the key to environmental protection. The simpler the more environmentally friendly the better. The fourth is the hardware: the quality of the hardware such as hinges, slide rails, handles, etc., also greatly affects the quality of the furniture.
The insiders also introduced the identification of some solid wood furniture wood: First, pay attention to whether there is clear wood grain on the furniture panel. If you have any, look at the back of the position and see if you have the same pattern. If it is, it can be considered pure solid wood. Another way is to look at thrift. In the place where the surface of the board is scarred, if the board has the same scar on both sides, it can be confirmed as pure solid wood furniture.

When purchasing solid wood furniture, you should also check whether the wood of the wooden board and drawer is dry and white, whether the texture is tight, delicate, and whether there is a pungent smell. Whether the processing of the surface of the board is fine, whether the panel is smooth, whether there are burrs, whether there are cracks or bubbles in the paint. The bad solid wood furniture wood is mostly the kind of chestnut skin red. Colors and styles will look a bit old-fashioned. The above are all tips of Yunshui Tan, so you can buy them with ease and comfort.

Source: GO Jiaju Furniture Network

be extracted from hemp

CBD Product

Cannabidiol Powder,CBD Isolate Powder,Cannabidiol Isolate Powder,CBD powder

JINING USP INTERNATIONAL CO.,LTD. , https://www.uspintl.com