Treatment of machine tool hydraulic system

From practice, I explored the method of leak detection in the hydraulic system of machine tools. 1. Valve leakage control valve, throttle valve, pressure reducing valve, sequence valve and relief valve main oil leakage: adjustment handle, pressure Screw cover, oil plug thread and joint surface. The main cause of oil leakage is due to the O-ring groove not meeting the requirements. Leakage method: 1 Disassemble the valve and rework the seal groove. 2 If the oil is leaking at the thread of the screw cap, a car can be pulled out on the end face of the screw cap.

UV Disinfection Lamp

Safe Function: The UV sanitize lamp with Volatile ozone can kill up to 99.9% of most viruses, airborne bacteria, and mold spores.Uses UVC sterilizer light, 360 ° degrees wide beam angle.Made of quartz material, long service life, high transmission rate, and better sterilization effect.

Use safety: It can be operated remotely through doors, walls, cabinets, etc. There is no limit on the angle, and you do not need to worry about being injured by ultraviolet radiation during operation. Use method 1: panel operation Use method 2: remote operation.

Applicable places:UV Disinfection Lamp can safely used in homes, as well as in hospitals, laboratories, malls, doctors″ offices, commercial buildings, food processing plants and other commercial and residential environments throughout the world - any big area place a concern for clean air exists.

Important :Exposing the Ultraviolet radiation for a long time will cause skin and eye burns, please pay attention to the Use instruction manual.People,pet animals and plants are Not Allowed to be present when the UV lamp lighting to work. Please leave away from the place of use immediately. To avoid damage to the skin and eyes, please DO NOT Stare at the ultraviolet light source

Uv Disinfection light,sterilizing UV Light,Germicidal lamp,UV lamp,disinfection lamp

Shenzhen Lanejoy Technology Co.,LTD , https://www.szbrassnuts.com