As an important part of home decoration, the design, materials and styles of ceramic tile products are more and more valued by consumers, and customers are more cautious in the process of purchasing ceramic tile products. For the tile floor in the ordinary residents' homes, why do some of them keep the light as new? Some face the "face problem" such as damage, scratches, shedding, etc. Many people think that the tile encounters the "face problem" "It must be a quality problem, and the relevant experts said that the short life of the tile is not necessarily a product quality problem. In many cases, improper maintenance will also result in a shorter tile life. Therefore, doing a good job of tile maintenance is an effective way to prevent tile damage, scratches and shedding. Today, Tianlong Babu, Xiaobian collected a few tricks for the maintenance of ceramic tiles for everyone, so that the ground of your home can also last forever, away from the "face" problem.
First, the paving process should pay attention to prevent problems from the source
Starting from the tile paving, all the problems of looseness, falling off, and water seepage are killed in the cradle. So why is the tile falling off?
Some professionals introduce the network super girl, because the tile is paved with cement mortar as a binder, and the tile after the paving is easy to absorb the moisture in the cement mortar. In the curing process, the cement which loses a lot of moisture has a reduced adhesive strength, so that it is easy to loosen and fall off the tile with the cement.
Therefore, before the paving, it is necessary to clean the ground dirt so that the cement and the ground completely fit. It is necessary for the tiles to be soaked before the paving to prevent the tiles from sucking in the mud.
Secondly, there must be seams in the tile laying process. Depending on the tile size, the gap is generally between 1-5mm. The purpose of this is to reduce the impact of product size deviation, and to prevent the tile from being inflated and contracted, resulting in uneven or peeling of the brick surface.
Second, daily cleaning has a coup to keep the tiles clean
Due to long-term exposure and contact with hard objects, the tile surface is easily worn and ground, which destroys the aesthetics of the tile surface, and the surface is too slippery, which reduces the home safety index. Through the maintenance of ceramic tiles, it is often possible to enhance the surface gloss of the product, increase the friction coefficient, and strengthen the surface hardness. First of all, adhesive or solid stains, it is not advisable to use a hard brush cleaning tool, such as a shovel, steel brush, etc. for forced hanging brush.
The appropriate cleaning agent should be selected for removal according to the nature of the stain. Acid-alkaline detergent can effectively remove the stain on the tile surface, but since the acid-base component may cause corrosion on the tile surface, it should not be used frequently. More acid-base cleaner should be used.
In addition, in the cleaning process, we not only need to remove the stains on the surface of the tile, but also clean the gaps in the tile joints, such as gap cleaning. You can use a soft brush to rub a little detergent, lightly brush the gap position, after cleaning, brush a layer of waterproof protective agent in the gap to prevent mold growth.
Third, regular maintenance benefits, occasionally a spa for the tile
After a long time of use, the surface of the tile often has uneven surface due to problems such as friction and accumulation. Regularly, the surface of the tile should be surface-care. The time interval is 2~3 months, which can effectively restore the surface gloss of the tile. At the same time extend the life of the tile. When waxing the floor tiles, thoroughly clean the stains and then carry out the wax surface treatment. Spread the wax evenly on the floor tiles. Generally, wait for the dryness within 8 hours after waxing. Do not trample the surface to prevent the marks.
The structure feature of the Earth Wire Clamp:
1. Puncture structure, to insure the puncture pressure, and it's easy to fix.
2. Pressurized structure, corrosion protection, and have a longevity of service.
3. Contact resistance is small, and the temperature of cord grip is low.
4. It's connected with different pathway lead, and it's useful.
5. Insulating property is wonderful.
If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.
Earth Wire Clamp
Earth Wire Clamp,Jdl Earth Wire Clamp,Jbc Earth Wire Clamp,Puncture Grounding Wire Clamp
Shandong Vantage International Trade Co., Ltd. , http://www.steelplate.be