The operation and maintenance precautions of the current riser (high current generator) are as follows when using and maintaining:
1. When unpacking, check whether the main circuit terminal is loose and whether the voltage regulator brush is in good contact.
2. When not in use for a long time, use a 500V megohmmeter to check the insulation resistance of the main loop to the ground before use. The resistance should not be less than 0.5 megohms.
3, the input voltage in line with the nameplate voltage value (-220V, -380V), the value of the difference should be ± 10%, the frequency is 50Hz.
4, the current range switch is not allowed with load operation.
5. When operating, rotate the handwheel uniformly and slowly so as not to damage the regulator.
6. The working time shall not exceed 5 minutes at full load and the working time shall be less than 2.5 minutes, but the working cycle shall be greater than 10 minutes.
7, riser shell ground terminal, use should be well grounded.
3. Support Mobile surveillance, P2P, CMS, IE
4. Micro SD memory storage, Audio, PoE, WiFi, Alarm
5. Day and night function with IR Cut Filter, night vision monitor
6. Protocol:TCP/IP. UDP, RTP, RTSP, RTCP, HTTP, DNS, DDNS, DHCP, FTP.
1. When unpacking, check whether the main circuit terminal is loose and whether the voltage regulator brush is in good contact.
2. When not in use for a long time, use a 500V megohmmeter to check the insulation resistance of the main loop to the ground before use. The resistance should not be less than 0.5 megohms.
3, the input voltage in line with the nameplate voltage value (-220V, -380V), the value of the difference should be ± 10%, the frequency is 50Hz.
4, the current range switch is not allowed with load operation.
5. When operating, rotate the handwheel uniformly and slowly so as not to damage the regulator.
6. The working time shall not exceed 5 minutes at full load and the working time shall be less than 2.5 minutes, but the working cycle shall be greater than 10 minutes.
7, riser shell ground terminal, use should be well grounded.
The 1MP Panoramic Fisheye Camera comes with Fish Eye lens 180 degrees view angle, great quality HD 720P Panoramic Camera, CCTV Security Fisheye Onvif IP Camera with PoE function,
1. Progressive scan CMOS sensor fish eye camera
2. Support ONVIF & Multi-protocols, Multi-brand NVR home security3. Support Mobile surveillance, P2P, CMS, IE
4. Micro SD memory storage, Audio, PoE, WiFi, Alarm
5. Day and night function with IR Cut Filter, night vision monitor
6. Protocol:TCP/IP. UDP, RTP, RTSP, RTCP, HTTP, DNS, DDNS, DHCP, FTP.
7. ABS environmental material.
Motion Activated Camera,Mini Security Cameras,Home Bulb Camera 360 Degree,Wifi Cctv Camera
MBOSS INDUSTRIAL , https://www.mbosssmart.com