Modern urban life is busy and tense, and a warm home can bring everyone the most relaxing leisure time. But how can you make your home warm and comfortable? With a little skill, you can easily create a pleasant home. We have a series of fashion information from house decoration to home decoration to help you have a relaxed and comfortable life.
"Family bathroom" has become an important part of the home, and it is our common pursuit to enjoy the freshness and freshness brought by it. As a functional area with a large amount of water, the decoration should be carried out from the laying of wall tiles, ceilings and equipment selection, and comprehensively consider the need for waterproof and moisture proof.
1. When laying the wall tiles or stone of the bathroom, it should be made waterproof under the surface layer. Use cement mortar to level the ground, apply good quality waterproof coating, and then lay a layer of cement mortar of 1 to 2 as the bonding layer. After the watering, the wood is used to make it flat and firm and the seams are tight. The surface layer of water should be treated to slope to the ground, not flooding, no water accumulation, no leakage after 24 hours storage test.
2. The ceiling of the bathroom is recommended to use aluminum plate with micro-holes to enhance ventilation and prevent condensation, and the moisture-proof effect is better. If you want to make gypsum board ceiling, you should first brush waterproof putty, then brush waterproof coating. In addition, PVC ceiling is easy to produce condensed water, and it drops, so use it with caution.
3, the installation of the pipeline inside the bathroom should try to avoid changing the original upper and lower tubes, must be horizontal and vertical, tightly laid, and the slope meets the requirements. The floor drain design is still based on the above sewer line, and the surface should be slightly lower than the ground. It is recommended to buy a good quality deodorant floor drain.
4, the installation position of the bathroom sanitary ware should be correct, the upper edge of the appliance should be horizontal. Bathroom appliances should be branded and have good waterproof performance, such as bath heaters or Yuba used in long-term wet conditions. The outer casing should be made of stainless steel, with good anti-corrosion performance, and with waterproof power switch, cable and plug.
5, the bathroom should be reasonably circumvented to use wood materials, when it is necessary to use, should use fire board or do a full mix of oil decoration, can be waterproof. When making ceilings or other package decoration, the hidden concealed wooden keel needs to be painted with waterproof coating or preservative.
As long as we pay attention to the moisture-proof work of the bathroom and do the above, we will be able to enjoy the comfort and natural happiness in the completely rest assured bathroom.
Product categorie of Repeater Case, we are specialized manufacturer in producing repeater box, Repeater Case, offerRepeater Case R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Repeater Box Process flow chart
3D drawing analysis→material purchase→rough machine core &
cav→finish machine core & cav→machine electrodes→heat
treatment→linear cutting cavities→EDM cavities→machine mould
base→polish→assembly→mould test.
Repeater Case
1) Product Material: aluminum alloy, zinc alloy and aluminum profile
2) Surface Treatment: chrome plating, sandblasting, painting, anodizing, powder coating, electrophoresis.
3) Suitable for communications, auto parts,lamp part series, water
pump part series, power tool series, radiator part series, anti-static
flooring products and Other Series Products.
4) Whole process is done in house including: Tooling, Die casting, CNC
machining, CNC milling, Stamping, Plastic injection, Painting and
powder coating, Customized cub-assembly.
Our Advantages:
1) Experience in die casting for over 10 years and served customers all around the world.
2) More than 200 professional and hard working employees pursue a wonderful career.
3) International advanced-level equipment such as CNC, numerical
lathes, furnance, welding equipment, CMM and detect &testing
equipment we used to ensure our product`s(Aluminium Die Casting for
Communications) quality.
4) OEM service, you demand is our pursued.
5) ISO quality control
6) Standard: ASTM BS JIN DIN etc
7) Applied software for specification drawings: Pro/E, Auto CAD, Solid work, CAXA, UG. etc.
 |
 |
| One corner of CNC Workshop | One corner of Die Casting Workshop |
Based on high quality aluminium die casting for Communications, excellent service, reasonable price and timely delivery, we welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
Repeater Box
repeater box,communication parts,repeater housing
Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com