When the outdoor unit is installed on the roof or in a place where there is no building, the strong wind shall not be blown directly to the exhaust outlet of the outdoor unit. If strong wind is blown to the exhaust outlet, the air in the outdoor unit will not be discharged easily. Obviously reduced, it may also cause failure.
The power socket shall be a three-wire jack socket with a ground wire. The structure shall be matched with the power plug of the air conditioner to be installed. The power outlet must have a capacity of at least 2 times the rated current of the air conditioner and should be located close to the random power plug of the air conditioner. For safety reasons, it is best to use air switches. 1 ~ 2 split wall mounted air conditioner should choose 10A socket; 2 ~ 5 cabinet cabinet should choose 2OA air switch.
Cover tape extenders are used when a reel of SMD components doesn`t have a leader at the beginning of the reel. The tape extenders add an additional 508mm (20") of tape as a leader and feed into SMT placement equipment as a piece of cover tape. These tape extenders reduce the loss of components when you have no leader tape to work with.Can be used with either paper or plastic tape, punched or formed pockets, from 8-44mm width.
SMT-1108 SMT Super Cover Tape Extender 8 & 12mm 5mm * 396mm 500pcs/box For 8 & 12mm carrier tape
SMT-1116 SMT Cover Tape Extender 16mm 9.1mm * 396mm 500pcs /box For 16mm carrier tape
SMT-1124 SMT Cover Tape Extender 24mm 18mm * 396mm 250pcs /box For 24mm carrier tape
SMT-1132 SMT Cover Tape Extender 32mm 26mm * 396mm 250pcs /box For 32 & 44mm carrier tape
SMT Cover Tape Extender,Tape Extender for SMT,Yellow Carrier Tape Extender,SMT Tape Extender
ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com