one. Product Overview and Uses:
Beijing Huaxia Keyuan Technology Development Center (more projects please visit http:// ) Adhesive Expert Group's latest development of single-component polyurethane color steel plate styrofoam technology, is a high-strength one-component polyurethane adhesive, mainly by the air and be The trace amount of moisture adsorbed on the surface of the sticky material is solidified, the hardened adhesive layer does not become hard without cracking, the density is evenly distributed, and the compression resistance and folding pressure strength are good. The product has good fluidity, convenient construction, superior performance, corrosion resistance, sound insulation, flame retardancy, high modulus, high strength, high viscosity, high displacement compensation and so on. Widely used in door manufacturing, light building materials , refrigeration equipment , environmental purification, vehicle and shipbuilding and other industries. Color plate, galvanized plate, aluminum plate. Gypsum plaster board, calcium silicate board, glass magnesium board. MDF board, plywood. Rock wool, glass fiber cotton, perlite, aluminum silicate fiber blanket. EPS, XPS squeeze Plastic board, PU hard foam, etc. have a good bonding effect:
two. Production conditions and cost profit accounting:
1. Investment in equipment for production of this product: 1 ton of stirring and irrigation of about 3,000 yuan; also can buy 1 old reactor about 5,000 yuan. Needs workers 2 --- 3 people, plant 50-100 square meters. The raw materials used to produce this product are easily available throughout the country, and there is no special requirement for the cultural level of production personnel.
2. It is not necessary to heat and pressurize during the production process. Stir at room temperature for 2-3 hours.
3. Provide the production company with information on the purchase of raw materials from manufacturers and equipment.
4. The product cost is around RMB 10 per kilogram, and the market price is expected to be around RMB 15.
5. Its profit can be calculated based on the output.
three. Technical service methods:?
1, to provide a full set of technical formulas, process information, on-site training, learning so far. ?
2. Technology transfer. The training fee is 22,000 yuan. Provide raw materials and equipment manufacturers.
3. At the same time to learn the single (double) component color steel plate adhesive technology, transfer fee. Training fee totaling 36,000 yuan
Technical consulting electricity
I. Product Overview:
Beijing Huaxia Keyuan Technology Development Center (more projects please visit http:// ) Adhesive Expert Group's newly developed two-component color steel plate adhesive technology, this product is mainly used for color steel plate and polystyrene foam, polyurethane rigid foam, Bonding of composite materials such as plastics, wood, and metals . The product is easy to use, fast curing, and strong adhesion.
Two-component benzene-free solvent type polyurethane adhesive
III. Physical and chemical properties:
Performance Main agent Curing agent Appearance Light yellow viscous liquid Tea brown liquid Viscosity mPaÂ·s (25Â°C) 500Â±100 200Â±50
Peel strength KN/m (color plate and polystyrene foam) Foam failure Curing time (min) â‰¤ 2
Four. Use method:
The main agent and curing agent of the product are mixed in a ratio of 1:1-1:1.2.
Direct continuous production of mechanical, manual application can be bonded to the material after pressing the composite paste.
V. Storage method:
Should be stored in a cool and dry place in the room, avoid contact with the moisture in the air.
The storage period is 6 months.
Six. matters needing attention:
Adhesives should be kept sealed during use.
Avoid contact with the skin. Keep workplaces well ventilated.
VII. Technology transfer methods:
1. Equipment investment for production of this product: 1 ton of mixing and irrigation for two about 6,000 yuan;
2. Without heating and pressure during the production process, stir at room temperature for 2-3 hours;
3. Providing production companies with information on the purchase of raw materials from manufacturers and equipment;
4. The production of this product is easy to buy raw materials and equipment, product cost 7-8 yuan per kilogram (black. White material per group) market price of 11-12 yuan. To train 1-2 technical personnel for the production side, and also to build factories;
5. A full set of technology transfer. The training fee is 20,000 yuan.
6. At the same time to learn double (single) component color steel plate adhesive technology, transfer fee 36,000 yuan.
Technical consulting electricity