The beneficiation equipment produced by our factory, compound pendulum jaw crusher, PEX jaw crusher, goose crusher, fine jaw crusher, ore dressing equipment have international advanced level of high energy and low consumption equipment. The country has excellent market share. The product performance is perfect, won the trust of customers, and won the close enthusiasm of domestic and foreign customers. Welcome customers to inquire about the jaw crusher is the characteristics of our company combined with modern crushers, widely inspected in various mines around the world. A new series of jaw crushers independently developed, produced and sold. Jaw Crusher is the most widely used crusher in mining machinery crushing equipment. The hot sale of jaw crusher also proves its commercial value. Our company provides you with the most thoughtful and convenient service. Welcome to visit!
The jaw crusher is the most commonly used crushing stone equipment in the world. It is mainly used for medium-sized crushing of various ores and bulk materials. The highest compressive strength of the crushed materials is 320MPa. Among them, the large and medium-sized jaw crusher is the leading product of our company and is currently in an absolute leading position in China. It is mainly used for medium-sized crushing of various ores and bulk materials, and can crush materials with compressive strength not more than 320Mpa, which are divided into coarse and fine broken. Widely used in mining, smelting, building materials, roads, railways, water conservancy and chemical industries.
Working principle of jaw crusher The structure of jaw crusher mainly includes frame, eccentric shaft, large pulley, flywheel, moving jaw, side guard, bracket, bracket rear seat, adjusting screw, return spring and fixed jaw. It is composed of active e-boards, and the brackets also play an insurance role.
The crushing method of the jaw crusher is a curved crushing type. The motor drives the belt and the pulley. The eccentric shaft moves the moving jaw up and down. When the moving jaw rises, the angle between the bracket and the moving jaw becomes larger, thus pushing the moving jaw. The plate is close to the plate, and at the same time, the material is crushed, smashed, milled, etc.; when the yoke goes down, the angle between the bracket and the moving jaw becomes smaller, and the moving plate leaves the plate under the action of the tie rod and the spring. The plate, at this time, the crushed material is discharged from the lower mouth of the crushing chamber, and the motor is continuously crushed and crushed and discharged periodically to realize mass production.
Performance characteristics of jaw crusher 1. The crushing chamber is deep and there is no dead zone, which improves the feeding capacity and output;
2. Its crushing ratio is large and the product size is uniform;
3. The gasket type discharge port adjusting device is reliable and convenient, and the adjustment range is large, which increases the flexibility of the device;
4. The lubrication system is safe and reliable, the parts are easy to replace, and the maintenance workload is small;
5. Simple structure, reliable work and low operating costs.
6. Equipment energy saving: single machine energy saving 15% to 30%, system energy saving more than double;
7. The discharge port has a large adjustment range to meet the requirements of different users;
8. Low noise and less dust;
Visit http:// in detail
Http://
Http://
ASTM A554 Decorative Stainless Steel Pipes is the main tubing line for a piping system. Generally, ASTM A554 Decorative Stainless Steel Pipes are made in stainless steel 304 and 316L, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both Sanitary Seamless Tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified ASTM A554 Decorative Stainless Steel Pipes comply to your your condition and FDA,GMP requirement.
ASTM A554 Decorative Stainless Steel Pipes - Polished Stainless Steel Tube – Stainless Steel Hygienic Tubes
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical
Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.
ASTM A554 Decorative Stainless Steel Pipes
ASTM A554 Decorative Stainless Steel Pipes,A554 Square Pipes,Stainless Steel Decorative Pipes
Kaysen Steel Industry Co., Ltd. , http://www.chinasanitaryvalve.com