QMD-I pulse electronic igniter is an igniter designed and manufactured by advanced electronic technology. It can be used for direct ignition of gaseous fuel and atomized liquid fuel. It is widely used in industrial furnaces and ignition of large and medium-sized cookers.
The igniter is small in size, light in weight, large in ignition arc energy, reliable in performance, novel in structure, convenient in use, and has the advantages of moisture proof and antifreeze due to high-grade epoxy resin potting in a vacuum container. It is an ideal industrial and civil fuel igniter.
First, technical parameters
1. Input voltage: 220V ± 10% , 50HZ
2. Output voltage: 20KV
3. Arc frequency: 100HZ
4. Working time: discharge time is not less than 10 minutes
Second, the product structure
1. Outline and installation dimensions
2. Wiring diagram
Third, the method of use
1. When installing, first turn off the power and connect the igniter power cord to the power supply.
2. Ground one end of the igniter high voltage line and connect the other end to the ignition pin (rod) or the positive plug of the spark plug.
3. After the connection is correct, the power can be ignited when the power is turned on. When the ignition is started, the high-voltage discharge end will generate a spark. Note: When igniting, the fuel is supplied at the same time.
Fourth, note:
After the power is turned on, if no spark is generated, the ignition is not successful:
a. Turn off the power supply and check whether the discharge distance is normal. Generally, the distance between the two stages is about 5~8mm .
b. If it still does not ignite and does not produce sparks, check the wiring and control circuit. Be careful that due to high voltage, the power must be turned off during inspection.
  Â
Together with Qinchuan Thermal Engineering, you have a partner who is sincere, sincere, responsible and considerate! I look forward to working with you. We will provide you with high quality, low price and efficient service... We look forward to working with you. Work QQ, Ali Wangwang: sxqcrg contact telephone 029-82605696, 13152054006, 15191440754 welcome to call at any time.
Serrated Steel Grating Specifications (mm):
Steel Grating Size: 1m*6m standard type (special size and American standard size are also customizable)
Material: Low carbon steel (Q235)
Surface Treatment: Hot dip galvanizing, paint or no coating
Surface Shape: Planform, tooth shape and I shape
Quality Standard:
Steel Grating Standard: China YB/T4001-1998
America ANSI/NAAMM (MBG531-88)
Britain BS4592-1987
Australia AS1657-1992
Steel Standard: China GB700-88 / ASTM (A36) / BS4306 (43A)
Hot Dip Galvanizing Standard: China GB/T13912-92 / ASTM (A123) / BS729
Serrated Steel Grating Surface Treatment:
- Untreated
- Painting
- Hot Dip Galvanizing
Serrated Steel Grating Application:
Widely used in power plants, refineries, sewage treatment plants, silos, chemical plants, highways, airports and docks and other platforms, walkways and gutter covers, stair step. Tooth steel grating which can be used for wet, slippery places, especially for offshore oil platforms.
Serrated Steel Grating
Serrated Steel Grating,Serrated Galvanized Steel Grating,Galvanized Serrated Steel Grating,Catwalk Serrated Steel Grating
Hebei Zhenxing Jinyuan Wire Mesh Group Co.,Ltd , http://www.zxsteelgrating.com