Tempered Water Jet Cutting Glass Panel EN12150 Approved

Model NO.: TX-1232
Fragment State: En12150
Technics: Physically Tempered
Flatness: High Class
Usage: Home Appliance, Electronics & Instruments
Thickness: 3-12mm
Trademark: Taixing
Transport Package: Wooden Crate or Carton
Specification: En12150/GB15763.2-2005/Bs
Origin: Cn
HS Code: 7007190090
Tempered water jet cutting glass
empered, drill holes,water cutting notchs
20 year experience
6mm,8mm  
-Certificate: BS6206, EN12150
  
Curved Tempered glass is heated over its softening temperature, and curved to the radius that requires. By suddenly chilling it with jets of cold air, then tempered glass shaped with a radian.
 
Features:
 
has same safety and ability of anti-impact with flat tempered glass, but has a higher intensity for the wind pressure and bending than the flat tempered glass.
 
Specification
 
Curved Tempered glass
 
Thickness: 3.5-12mm
Maximum size: 2000mmX1000mm
Minimum size: R>=350mm
 
Abnormity Curved Tempered glass
 
Thickness: 4-12mm
Maximum size: 2500mmX1000mm
Minimum size: R>=300mm
Annual Productivity: 20,000M2
 
Equipment:  US made TAMGLASS Continuous Tempering Furnace
                    Finnish made TAMGLASS Flat tempering Furnace
                    Bending and Tempering Furnace

H-beam is a kind of new economic construction steel whose section shape is economical and reasonable, with good mechanical properties, uniform extending on every direction of the cross section and small internal stress when rolling. Compared with ordinary I beam, it has the advantages of big section modulus, light weight and metal saving which can make the weight of building structure reduced 30-40%; And also because of its paralleled internal and external sides of the webs, right-angled edges, assembled and combined into components which in total can saving the workload of welding and riveting to 25%.
H shape steel


H Shape Steel

H Shape Steel, H Type Steel,Steel H Beam, Structure H Beam

Hebei Dongshengyuan Trading Co.,Ltd. , http://www.wiremeshdsy.com