In modern times, marble flooring has become an essential material for many people's homes. In particular, natural stone is favored by consumers because of its natural and beautiful features. Marble floors can add beauty and elegance to the home, and proper cleaning care can keep it lasting and beautiful. Here we introduce: marble floor waxing techniques and precautions.
1, marble floor wax:
(1) Place the wax sign on the job site first.
(2) Raise the stand and cover the black fiber mat.
(3) Put the wax water into the refrigerator of the multifunctional floor washer.
(4) Control the machine, pull the control lever of the water tank, and spread the wax water evenly on the ground.
(5) Control the machine direction, from left to right, walk around 2 or 3 times.
(6) Upstream and downstream overlap is about 10CM2.
(7) After 5 minutes, use a suction machine to suck up wax and old wax stains.
(8) Use a wet mop twice and drag it once more with a mop.
(9) Seal the wax after the ground is dry.
(10) Soak the wax in the wax mop.
(11) Apply the mop onto the floor evenly after placing the mop on the water clip.
(12) The layer is separated from the layer by about 30 MΙN (based on dry feel).
(13) About 3 days later, the last layer of wax is dried and polished with a high-speed polisher.
(14) The marble floor is waxed every two months.
Waxing floor notes:
1. Choose good weather and wax
Humidity in rainy days is too high and waxing can cause cloudiness. When the room temperature is below 5 degrees, the floor wax will harden. Do not wipe the floor with a rag containing chemicals before waxing, which may cause poor adhesion of the floor wax.
2. Remove trash and dirt from the floor surface
Use a vacuum cleaner to remove trash and dust from the floor surface. Wipe the stains on the floor with a diluted neutral detergent, and wipe the hard-to-clean stains with a solution of water. To prevent detergent from accumulating in the grooves, wring out the detergent rags. Floor wax scavengers can cause floor stains and bulging and must not be used.
3. Wipe with a wrung rag
Wipe the surface of the floor, especially the grooved part, with a hard-wrung rag, and wipe it carefully so that no detergent remains. Such as residual detergent and moisture can cause the surface to whiten and bulge.
4. Fully dry
The moisture on the floor surface and groove is completely dry for waxing. According to the season, the time required will also change, but it will take more than half a day. If not fully dried, the floor wax will not closely adhere to the floor surface, affecting the appearance, resulting in whitening phenomenon.
5. Waxing method
Shake the container with floor wax and stir well. Before the entire floor of the room is waxed, perform partial trials at the corners of the room, etc., and check for any abnormalities. To prevent floor wax from contaminating the wall baseboard and furniture from being covered with tape, etc., use a clean rag to fully dip the floor wax so as not to drip it properly. Do not pour the floor wax directly on the floor. Produces trace marks and loop marks. In accordance with the direction of the wood grain of the floor carefully applied, do not leak coating or uneven thickness, smearing too little will cause uneven shade, too much will lead to poor film formation, keep the thin thickness is the key to waxing, do not dilute the floor wax with water .
6. Do not walk on the floor before drying the floor wax
Drying usually takes 20 minutes to 1 hour. If the method of waxing is used twice, the second application should be performed after the first complete drying. Wax once every 6 months or so can keep the floor beautiful for a long time.
Editor's summary: The process and precautions for the waxing of marble flooring are introduced here. I hope to help you. For more information, please pay attention to this site.
Marble floor tiles
Compressor Hose,Air Compressor Hose,Best Air Compressor Hose,High Temp Air Compressor Hose
Changxing VACUFLEX Hose Technology Co., Ltd. , https://www.vacuflex-cn.com