Guanzhu Ceramics
1. Two cases of tile loss
1. Normality loss
According to the national ceramic tile production standards, the out-of-factory ceramic tiles will have inconsistent thickness, unevenness, color deviation, etc. The same batch of ceramic tiles will inevitably have unqualified products; decoration workers will also cause work errors during the laying process, these errors All are normal phenomena and unavoidable. Generally, the loss of 2 or 3 tiles in 100 tiles is within the normal range.
Sometimes the size of the final corner during the paving process does not match the size of the tiles. At this time, the tiles need to be cut. The remaining tiles cannot usually be used. This causes waste. This is a normal loss. In terms of general usage, the overall consumption rate of ceramic tiles in the range of 5% -10% belongs to the normal range. If it exceeds this range, it is likely that the following abnormal losses will occur.
2. Abnormal loss
This situation is caused by improper purchase and construction. The worse the quality of the selected tiles, the greater the waste due to damage. If the poor quality and unqualified ceramic tiles are purchased, the resulting waste of laying tiles is very terrible; during the construction process, if the workers neglect the treatment, it will reduce the practicality of the tiles, even if the workers are unskilled, they accidentally break the tiles , Which also belongs to abnormal loss.
Second, how to effectively reduce the loss of ceramic tiles?
1. Purchase high-quality products
Inferior ceramic tiles will have many color deviations, squareness, and different thicknesses, and it is more prone to wear problems during the paving process. Therefore, consumers should choose high-quality brands in the market as much as possible, purchase qualified products, and have after-sales guarantees. They need to negotiate whether they can make up, return, replace, and claim conditions. The follow-up treatment is also convenient if problems occur.
2. Accurate measurement area
The area and pattern of the house are related to the loss of paving, so the number of tiles needs to be estimated based on these conditions. Consumers must measure the space size accurately before buying tiles, and know how many tiles to buy. The smaller the room, the greater the loss, so the size of the tiles should also be considered. For ordinary rooms of 10-30 square meters, ceramic tiles below 600 * 600mm are generally selected. Too large specifications will cause more losses.
3. Choose workers carefully
During the process of paving, the owner is advised to supervise the whole process to prevent the workers from cutting the tiles or using them unreasonably. It is best to hire workers with rich experience. The technical proficiency of workers will affect the loss of tile laying. Skilled workers will also provide the owner with a cost-effective solution. Therefore, the careful selection of workers is also an important link to reduce losses.
The above content is provided by Guanzhu Ceramics. If you buy a ceramic tile, choose Guanzhu Ceramics!
Hand Made Sink.That must be higher quality than a regular sink.And the workmanship is more delicate, not easy to break.More durable.Families still use handmade sinks more often.Manual flume thickness is generally relatively thick, generally is about 1.3mm-1.5mm, this thickness is easy to weld, and thickness is uniform, will not appear to stretch the local too thin phenomenon of the flume.So look from material, manual water trough is certain to be more wear-resisting some.From the appearance, the manual sink straight up straight down, angular, texture is stronger.The manual water trough surface treatment now also has pearl sand or wiredrawing water trough, this we do not worry about its beautiful sex.
Hand Made Sink
Hand Made,Hand Made Sink,Handmade Kitchen Sink,Handmade Sink Bowl
SUNRISE HOME GOODS(M)SDN.BHD. , https://www.sunrisesink.com