At present, the development of coal slag crushing equipment in the domestic market is inseparable from the development of mining equipment. The coal slag crusher plays an important role in the development of the mining industry and has become a pillar industry of the industry. The coal slag crusher reduces the fineness of the product. Fully realized the finer crushing effect of the material, and became the most important force in the domestic market crusher industry. The coal slag crusher made by Henan Gongyi Wanhua Machinery Co., Ltd. combines the advantages of high-speed impact grinding and airflow grinding to extract its essence and form its own uniqueness. The crushing mechanism, high efficiency and energy saving, is widely loved at home and abroad.
Main instructions:
The traditional method is to crush the cinder by a single-stage hammer crusher, but the disadvantages are many.
1. The production is low and the wet coal slag is difficult to be pulverized. The wet coal slag is very easy to block the bottom of the pulverizer, and the dry circulation is not cut.
2, the crushing ratio is stricter, the discharge granularity is coarse, and the brick making requirements are not met.
3, the operating cost is high, the low output directly leads to high cost, and some need to be screened again and again, the large material is then subjected to secondary pulverization, and the cost per ton of coal slag (electricity, wear, wages) needs 6.8 yuan.
The new coal slag crusher developed by our company solves the problem of long-term wet coal slag crushing. The output is high and the consumption is low. It can crush more than 20 tons per hour, and the cost per ton of cinder (electricity, wear and wage) is not more than 2.5 yuan.
The machine is equivalent to two hammers combined into one, reasonable combination into one whole, two sets of rotors are used in series, with the following characteristics:
1. Double-rotor upper and lower two-stage crushing
2, no screen bottom, high humidity materials, never block
3. Unique two-way gap technology.
4, the device counterweight balance wheel, running smooth inertia, saving 20%.
5, centralized lubrication system, no oil injection, convenient and fast.
6, hydraulic manual start the case.
Our main products: Cinder Crusher Wet Crusher Network: http://
Company Name: Gongyi Wanhua Machinery Manufacturing Co., Ltd. Contact Phone Contact Mobile
Using advanced hot-dip galvanized material , precision roll forming production process, polyurethane foam that free of hydrofluorocarbon inside door, light weight, high strength, appearance nice. The doors have advantages of tamper anti-theft , noise isolation thermal insulation and corrosion resistance;the doors are widely used in shops, garages, houses, supermarkets, warehouses and industrial plants,etc.
Depending on the characteristics of the buildings,we can choose interior, exterior and intermediate three different installation ways, doors stay in the upper part of door after rolling up , this could save garage space, and also could keep the garage clean and beautiful by prevent the mud, rain and snow ,etc going into the garage.
Galvanized Roller Shutter Door
Galvanized Roller Shutter Door,Standard Galvanized Roller Shutter Door,Automatic Galvanized Roller Shutter Door,Steel Roller Shutter Safe Door
Shenzhen Hongfa Automatic Door Co., Ltd. , http://www.hongfadoor.com