Switch sockets belong to a very small project in the renovation process. Because this project is small and often overlooked by people, such an attitude will also inconvenience life later. Many people will find that the switch socket problem is really a good headache after entering the new home. Today we will take a look at the regrets about switch sockets.
1, switch socket is blocked by furniture
Some of the switches and sockets in the home were left in the wrong place. The main reason was that the furniture arrangement was not the same as the beginning. Some of the results were blocked, some were not available, and some were not enough.
2, the bedroom forgot to install dual control switch
There was no double-controlled switch on the bedside of the bedroom. After reading the book in the bed at night in the nest, she was forced to climb up to the door to turn off the lights and regret that she was dead. Aisles and stairs also forgot to install two-hole switch.
3, TV wall outlet installed less
The sofas and TV cabinets next to the living room have fewer outlets installed, and now the wires are all over the floor.
4, sofa table, no reserved socket under the table
There are no reserved seats below the sofa table. Now fans, kung fu tea sets, notebooks, chargers, floor lamps, winter heaters, mosquito killers in summer are not inserted. If you have installed the ground plug, you will not be afraid of the open line. Under the table, he also forgot to install it. Now every time he eats the hotpot, he has to pull it from other places.
5, socket forget to choose switch
The sockets of some of the household appliances that are frequently used in the home have forgotten the use of switches, and now they have to remove the plugs after each use. If you installed a socket with a switch, you do not need to pull the cable frequently now. Just switch it by hand.
6. No socket installed near the toilet
Previously used an ordinary toilet, and later wanted to change the smart toilet. Because the socket has not been reserved before, it is very troublesome to re-install and replace it.
7, bathroom switch socket forget to install splash cover
At the beginning, the socket of the bathroom did not take into account the particularity of the wet environment of the bathroom, and the switch socket was the same as other spaces and did not have a splash cover. After checking in, it was found that the switch socket was easily splashed with water, and later it was replaced with a switch socket with a splash cover.
After reading this article, is everyone not immediately aware of it? In fact, if you can consider these issues at the beginning of the renovation, then in the subsequent life will be less trouble, but also make the home life more convenient.
Switch socket apartment renovation decoration process
Aluminum Casting Led Lighting Parts
Aluminum Casting Led Lighting Parts,Led Bulb Aluminum Housing,Led Aluminum Extrusion,Led Aluminum Profile
NINGBO AIKEHAN METAL PRODUCT CO.,LTD , http://www.diecastingsupplier.com