Tempered paint is now a new decorative material, showing us a white toothpaste. It can be directly applied on the concrete and plastering mortar base layer for the coating, and can also be used as the surface coating. It has the characteristics of strong moisture resistance and high hardness. The following Xiao Bian will introduce you to the relevant knowledge of tempered paint , want to understand can see Oh!
Advantages of tempered coatings
1. The paint is non-toxic, non-polluting and will not endanger people's health.
2. Complete cancellation of traditional coatings, such as solvent-based coatings, polyurethane coatings, and other substances that contain a large number of toxic substances that harm human health - formaldehyde, benzene and other substances.
3, tempered paint has a variety of functions, such as pest control, anti-corrosion, radiation protection, anti-ultraviolet radiation, sound and flame retardant, etc., while the traditional coating function is relatively single.
Steel coating construction process
1. To facilitate the construction of later renovations, to meet the quality requirements of quality projects, to reconcile the conflict between the renovation project and the installation of pipelines, to solve the problem of difficulty in the operation of coating construction after the installation of electrical and mechanical pipelines, and to avoid the blind spots of the construction of the coating, before installation of the electrical and mechanical pipelines. First, the local pipeline is placed close to the ceiling and the bottom of the tempered paint is applied, and then the other parts of the paint are applied at the bottom.
2. After the standby power is installed, other processes that may contaminate the paint finish will be completed and the overall paint surface finish will be applied.
3, paint construction sequence from top to bottom, that is, the first roof, the back wall surface, the bottom of the wall coating construction on the first after the next, the lower part of the wall to stay 1.8m high temporarily do not paint the bottom layer, in order to protect the finished product.
4. When using, mix one ton of dry powder coating and cold water according to the ratio of 1:0.4, 2 kg of pure hot water, and add the mixture to mix for about 30 minutes.
5, then place 8 hours.
6, stored in a dry place to prevent moisture, storage time can not exceed 30 days.
7. During the construction, the wall should be protected from wet walls and loose walls. The old wall should eliminate dust and remove paint residues.
Construction Coating Precautions
(1) The construction temperature is 0-35°C, and the base surface temperature is preferably not lower than 5°C.
(2) The material storage should be protected from moisture, water, and direct sunlight.
(3) The gloss is the same and do not allow dripping or leaking.
(4) The amount of each ingredient should not be too much, so as not to stand for a long time, resulting in curing.
(5) It is necessary to use special auxiliary materials, water, banana water, alcohol, and gasoline.
(6) It is advisable to use a temperature of 0-35°C below the humidity of 85%. Do not apply under the following conditions: rain, snow, fog, frost, high wind, or relative humidity above 85%.
(7) The film can be completely cured after 7 days at room temperature. It is recommended not to use it in advance.
The above is the construction process small to give us the advantage of steel coatings, steel coatings. I believe we all have further understanding and hope that our introduction will help you. If you want to know other related information, please continue to pay attention to this site, more exciting so stay tuned!
Retarder, a kind of admixture for concrete, is used to reduce the hydration speed and heat of hydration of cement or gypsum and prolong the setting time. In order to meet the needs of our customers, we can provide you with a variety of different types of retarders for your choice.
This product has good adaptability to cement, with the features of low dosage, high water reduction rate (up to 45%), good fluidity retention performance, With the characteristics of no chlorine and low alkali, it can be effectively incorporated into concrete to save costs.
Concrete Admixture,Hydroxyethyl Acrylate,Admixture Calcium Lignosulphonate,Calcium Lignosulfonate Liquid
Shenyang East Chemical Science-Tech Co., Ltd. , https://www.eastchemy.com