The windows in the home decoration account for a lot of space. If the sunlight is large, it will be dazzling. In addition, the hot temperature is also very annoying. In order to solve this problem, many people are now starting to put on the glass. membrane. The following Xiao Bian came to tell you about how much money a household glass film and a glass window film is not blistering.
Household glass film how much money a flat
How much is a household glass film flat, in fact, we must know that the price factors affecting the glass film is still more, and its price will also be based on different regions is also a little price disparity, the area of ​​the film is not big, how difficult construction, and many more. Films are generally divided into high, middle, and low grades. For example, if the brand price is high, then it is the middle and low grade. The glass film is generally divided into: glass foil explosion-proof membrane, glass foil insulation film, glass foil decoration film, glass film frosted film, there is used on the car. If you choose the brand film, then its price is two hundred, the mid-range one hundred to two hundred, the low-grade is dozens of, in addition to the project in order to cope with the low-grade, the family still suggests that you choose the high-end class, This product is more able to achieve results, and it is relatively guaranteed.
How to paste the window film is not foaming
1, the first step, clean the glass window:
First you can use the water bottle filled with water and then drop 4-5 drops of detergent, and then slowly shake it, then use the matching water to clean the glass window on it, this side to remind you that can be used during the cleaning process Scraper with cleaning, so you can play a thorough cleaning effect, while paying attention to the glass frame must also be cleaned!
2, the second step, divided film:
Window film is divided into two layers, one layer: main film, another layer: transparent protective film
When peeling the film, remember to tear off the protective film (we only need to use transparent tape to stick to both sides of one corner of the film, and pull it apart so that it can easily separate the main film from the protective film). Remember to spray the dishwashing water on the main membrane surface. Be sure to spray evenly. Do not worry that your film will lose its viscosity. The purpose of this is to facilitate the movement of the membrane.
3, the third step, on the film:
Remember to spray dishwashing water onto the cleaned glass (must be sprayed evenly) Apply the main film of the window film (with adhesive surface, facing the glass window)
4, the fourth step, pad protective film:
After the main film is affixed, remember to adjust the position of the main film, and at the same time, remember to put the newly torn protective film on the main film. This is to prevent the film from being scratched when the wiper wipes.
5, the fifth step, wiper:
After padding the protective film, remember to scrape it off from the middle using a squeegee (must be scraped from top to bottom in order) to scrape the water and air bubbles between the film and the glass.
The sixth step, trimming:
After the water is scraped, remove the protective film, and then use the scraper to press the film. Take the utility knife along the edge of the frame to cut off the excess film and you're done.
Summarizing: How much money for a household glass film and how to paste a glass window film without foaming related content is introduced to this, and now there are more and more people using a family of film, this product brings many benefits to the family, But when you post it, you should pay attention to some details.
Galvanized Sheet,Galvanized Plate,Galvanized Corrugated Sheets,Galvalume Sheet Steel
Zhonglian Yongsheng Special Steel Co.,Ltd , https://www.zlysssteel.com