After acceptance of new homes, how do you proceed with the inspection?

1. The overall appearance of the building is not tilted. The beams, columns and walls in the room have no significant dimensional deviation (please bring a tape measure).

2. There are no obvious cracks on the walls, floors, ceilings, etc.

3. The joints between the doors, windows and walls shall be treated in a smooth manner with no missing corners.

Water supply and drainage acceptance

1. There is no water seepage at the connection between the water supply and drainage pipes, especially the connection of plastic pipes.

2. All taps have normal water discharge, the toilet does not leak water, the water pipes are not broken, and the interfaces are well sealed.

3. Kitchens, bathrooms, balconies have sufficient slopes on the ground, no leakage from floor drains, and rapid draining.

4. In the kitchen and toilet water soaking test for 24 hours, there is no leakage phenomenon, in which: the floor drain out of the wall pipe should not have water seepage to the outside wall; there should be no water from the kitchen, toilet along the wall foot seepage to the hall, room wall surface The water in the upper resident kitchens, toilets, and balconies should not infiltrate the ceiling of your home (especially around the ceiling lamp holders, around the mouth of the risers); the ceilings and corners under the roofs, and the walls (especially around the windows) ) There should be no traces of water infiltration.

Electrical acceptance

1. Check the sensitivity of the main power switch and leakage protection device in the room (usually based on the detection of the protector's own button to see if the protector works);

2. Check whether the laying of wires in the house is reasonable and beautiful;

3. Is the three-wire socket installed?

4. Is the lamp switch normal and the outlet is energized (you may wish to bring a rechargeable razor to test);

5. The doorbell and alarm system are working properly.

Decoration acceptance

1. Whether the brand is consistent with the contract or model. Most of the real estates currently on the market are 期房. Developers often do not determine the specific brand of decoration materials to be used in the future when signing a home purchase contract. Therefore, most of the contracts concerning the decoration of a home purchase contract are often just “a certain brand or "Same grade product" is even replaced with the word "high grade". Therefore, when signing a home purchase contract, homebuyers must have a more detailed supplementary agreement on the refined decoration part, and must agree on the brand and model for the materials, equipment, and facilities used in the decoration.

2. If the brand is consistent with the contract, it is also necessary to check whether the product actually delivered is a product of relative grade compared to the “model” in the “sample”, or it is replaced with a lower grade. Some developers had already demolished the model room when they handed it in. They couldn't find any "model" to confront the quality. In this case, it is important to leave evidence of the model, such as taking pictures of some templates.

3. How is the construction quality? Pay attention to see if there are empty tiles, raised floors, wall cracks, and even doors and windows are skewed.

Inspector's Top Ten Brands Wardrobe Brand Window Switch Sockets Toilet Electric Toilet Model Room Decoration Model Room Floor Tiles Bathroom Doors Size Overall Bathroom Bathroom Doors Bathroom Leakage Toilet Size

ASADAL Solar Lights used high power LED with super brightness, and equipped with international top technology battery that can be charged by solar cell module.  all have 2 yesrs product warranty for the whole set. It's your indispensable outdoor kit.

Solar Lantern

Solar Lanterns,Solar Camping Light,Solar Lamp Lights,Solar Led Lights

Shenzhen Asadal New Energy Tech Co., Ltd. , http://www.asadal-solar.com